High-speed doors made to measure
The right high-speed door – configured in minutes
Indoor, outdoor, insulated or freezer: choose the size, curtain, drive and accessories of your high-speed door yourself and receive a no-obligation quotation. No detours, no sales meeting beforehand.
Location, size, curtain, colours, drive, accessories, enquiry.
Start nowDoor types
High-speed and rapid roll doors for every requirement
Indoor high-speed door
An indoor high-speed door is a fast acting door that separates zones inside a building quickly and tightly without slowing down forklift and tugger train traffic. It typically opens at around 1.5 to 2.5 m/s and is designed for high cycle rates.
Learn more →Outdoor high-speed door
An outdoor high-speed door is a high-speed door in the building envelope, designed with wind bars, reinforced guides and weather-resistant materials for wind pressure according to EN 12424. It typically opens at 1.5 to 2.5 m/s.
Learn more →PVC high-speed door
A PVC high-speed door is a power-operated industrial door whose curtain is made of tear-resistant PVC-coated fabric and typically opens at 1.5 to 3 m/s. It is the most widely used design for openings with high cycle rates – indoors and outdoors.
Learn more →Clear curtain door
A clear curtain door is a high-speed door whose curtain is made entirely or largely of transparent PVC film. It typically opens at 1.5 to 3 m/s and lets visibility and daylight through even when it is closed.
Learn more →Spiral door
A spiral door is a high-speed door whose panel of rigid aluminium slats runs without contact into a spiral guide above the opening. It combines a typical opening speed of around 1.5 to 2.5 m/s with wind stability, insulation and quiet operation.
Learn more →High-speed roller shutter
A high-speed roller shutter is an industrial roller door whose aluminium slat curtain is coiled onto a shaft by an inverter-controlled drive at typically around 1 to 2 m/s. It opens many times faster than a conventional roller shutter, which stays well below 0.5 m/s.
Learn more →Applications
Where high-speed doors are used
High-speed doors for logistics and warehousing
A high-speed door for warehouses and logistics is a power-operated industrial door at internal transfer points, storage zones and access routes that lets forklifts, tugger trains and AGVs pass without waiting. It opens at around 1.5 to 3 m/s and closes immediately after each passage.
View application →High-speed doors for the food industry
A food industry high-speed door is an industrial door of hygienic design that separates hygiene and temperature zones with short open times and can be cleaned residue-free with foam and water, from meat processing to beverage bottling.
View application →High-speed doors for pharma and cleanrooms
A cleanroom door is a high-speed door that separates cleanroom zones with short open times, a tight curtain and smooth, low-particle surfaces, keeping the pressure cascade and cleanroom class stable in the pharmaceutical industry, in laboratories and in healthcare.
View application →High-speed doors for cold storage and freezer stores
A cold storage door is a door at the boundary between the temperature zones of a cold store or freezer store that limits cold loss, moisture ingress and ice formation during each passage. In daily operation, this job is usually done by insulated high-speed doors, heated in sub-zero areas.
View application →High-speed doors for industry and manufacturing
An industrial high-speed door for manufacturing is a power-operated door with an opening speed of around 1.5 to 3 m/s that separates production, storage and dispatch without slowing material flow. The short open time keeps heat, dust and noise in their respective zones.
View application →High-speed doors for car parks
A high speed car park door is a power-operated entrance door – usually a quiet spiral or slatted door – that opens far faster than a conventional roller shutter. It cuts waiting times at the entrance, keeps unauthorised users out and spares the neighbours noise.
View application →Delivery and installation
Delivered direct from the factory, installed by your installer
Every high-speed door is manufactured to measure according to your configuration and delivered direct from the factory by freight forwarder, across Europe. You receive a complete door with drive, control system and safety devices as configured, together with the documentation for installation and operation and the declaration of performance for CE marking.
Installation and commissioning are carried out by your installer: your own maintenance team or an industrial door installer of your choice. Installers and dealers order a made-to-measure door from us for installation at their customers’ sites, without holding stock (for installers and dealers). We reply to every enquiry in English.
- Delivery direct from the factory across Europe
- Complete door as configured
- Installation documentation, declaration of performance, CE marking
- Installation and commissioning by your installer
- Replies to your enquiry in English
Configure your high-speed door and request a quote
Choose size, curtain, drive and accessories in a few steps. You receive a non-binding quotation.